405 NM LASER (DIODE; MM FIBER)

Item Code:
0405L-14A-NI-PT-NF
Product status:
Full production Product specifications are stable. Delivery time is predictable.
Availability:
Description
Fiber coupled 405 nm diode laser module is a robust and handy unit for alignment-free operation throughout the lifetime of the laser. Proprietary fiber coupling technology ensures good power stability and excellent fiber-coupling efficiency. An end-cap is provided against degradation of the fiber tip inside the module thus, up 100 mW of power can be coupled into the fiber.
FC/PC connector is provided as a standard and the pigtail length is approx. 1 m. Other connectors are available as well.
Specifications
Last edited on:  15 March 2018
Parameter Minimum Value Typical Value Maximum Value
 Central Wavelength, nm 402 405 408
 Longitudinal modes - multiple -
 Spectral line width FWHM, nm - 0.5 1
 Output power, mW - 130 1 -
 Power stability, % (RMS, 8 hrs) - 1 2 2
 Power stability, % (peak-to-peak, 8 hrs) - 2 3 3
 Noise, % (RMS, 20 Hz to 20 MHz) - 0.25 4 0.6
 Transversal modes - Multiple -
 Control interface type - UART/USB -
 Operation mode - APC (CW) -
 Modulation bandwidth, MHz - optional 5 -
 Input voltage, VDC 4.8 5 5.3
 External power supply requirement - +5 V DC, 1.5 A -
 Dimensions, mm - 50 x 30 x 16 6 -
 Fiber Length, m 0.95 1 1.1
 Heat-sinking requirement, °C/W - 1 -
 Optimum heatsink temperature, °C 15 20 30
 Warm up time, mins (cold start) 0.1 0.5 1
 Temperature stabilization - Yes -
 Overheat protection - Yes -
 Storage temperature, °C (non-condensing) -10 - 50
 Net weight, kg 0.1 0.12 0.14
 Max. power consumption, W 0.4 2 10
 Warranty, months (op. hrs) - 14 (10000) 7 -
 RoHS - Yes -
 CE compliance - - General Product Safety Directive (GPSD) 2001/95/EC
- (EMC) Directive 2004/108/EC
-
 Laser Safety Class - 3B -
 OEM lasers are not compliant with - IEC60825-1:2014 (compliant using additional accessories) -
 Country of origin - Lithuania -
1 The optical power can be tuned from virtually 0% to 100%. However, other specifications, such as central wavelength, power stability, noise, polarization ratio are not guaranteed at power levels other than factory preset power. Significantly worse power stability is to be expected at very low power levels, e.g. <3% from specified nominal power.
2 Long term power test is carried out using an optical power meter with an input bandwidth of 10 Hz. Actual measurement rate has a period of about 20 seconds to 1 minute.
3 Long term power test is carried out using an optical power meter with an input bandwidth of 10 Hz. Actual measurement rate has a period of about 20 seconds to 1 minute.
4 Noise level is measured with a fast photodiode connected to an oscilloscope. The overall system bandwidth is from 2 kHz to 20 MHz.
5 TTL digital modulation up to 10 MHz.
6 Excluding control interface pins and an output window/fiber assembly.
7 Whichever occurs first. The laser has an integrated operational hours counter.
Note: Product specifications are subject to change without prior notice to improve reliability, function or design or otherwise.
Typical spectrum

Spectrum of 405 NM LASER (DIODE; MM FIBER) Typical spectrum of 0405 nm diode laser. Measured with 10 pm resolution.