450 nm Laser (Diode; SMA port)

Item Code:

0450L-36A

Product status:

Availability:

Description

This is a multimode fiber coupled high power blue diode with more than 600 mW output power. 450 nm laser diode module is an excellent choice for flow cytometry, fluorescence and biomedical applications. Small footprint, stable power, low power consuption are only a few advantages of this laser.

Links and Downloads

Control Software (Windows)

Accessories

Diode Laser Essential Accessory Bundle
AM-BUNDLE1

SLM Laser Essential Accessory Bundle
AM-BUNDLE2

USB Break-out-Box for Single-Wavelength MatchBoxⓇ
AM-C8

RS232 Break-out-Box for Single-Wavelength MatchBox®
AM-C3

18W USB type C power supply, PD
AM-P7

60W USB type C power supply, PD
AM-P8

Fan Cooler for MatchBox®
AM-H3

Compact Fan Cooler For MatchBox®
AM-H8

M6 Optical Breadboard Adapter for MatchBox®
AM-H7

Replacement Adapter for Coherent CUBE Type of Lasers
AM-H6

7000 mAh POWER BANK FOR LASER
AM-P6

Laser Safety Goggles for 180-532 nm
ARG#55

Applications

Laser Diffraction Particle Analysis

Confocal Microscopy

Food sorting

Specifications

Last edited on: 13 January 2021

Parameter	Minimum Value	Typical Value	Maximum Value
Central Wavelength, nm	440	450	460
Longitudinal modes	-	Multiple	-
Spectral line width FWHM, nm	0.9	1.4	2
Output power, mW	-	300 ¹	-
Power stability, % (RMS, 8 hrs)	0.05	0.2 ²	1
Power stability, % (peak-to-peak, 8 hrs)	0.5	1 ³	2
Noise, % (RMS, 20 Hz to 20 MHz)	0.2	2 ⁴	10
Transversal modes	-	Multiple	-
Control interface type	-	UART ⁵	-
Operation mode	-	APC (CW)	-
Modulation bandwidth, kHz	-	1	-
Input voltage, VDC	4.8	5	5.3
External power supply requirement	-	+5 V DC, 2 A	-
Dimensions, mm	-	50 x 30 x 18 ⁶	-
Heat-sinking requirement, °C/W	-	0.5	-
Optimum heatsink temperature, °C	15	20	30
Warm up time, mins (cold start)	0.1	0.5	1
Temperature stabilization	-	Internal TEC	-
Overheat protection	-	Yes	-
Storage temperature, °C (non-condensing)	-10	-	50
Net weight, kg	0.1	0.12	0.14
Max. power consumption, W	5	10	20
Warranty, months (op. hrs)	-	14 (10000) ⁷	-
RoHS	-	Yes	-
CE compliance	-	- General Product Safety Directive (GPSD) 2001/95/EC - (EMC) Directive 2004/108/EC	-
Laser Safety Class	-	3B	-
OEM lasers are not compliant with	-	IEC60825-1:2014 (compliant using additional accessories)	-
Country of origin	-	Lithuania	-

¹ The optical power can be tuned from virtually 0% to 100%. However, other specifications, such as central wavelength, power stability, noise, polarization ratio, beam shape, quality and circularity are not guaranteed at power levels other than factory preset power. Significantly worse power stability is to be expected at very low power levels, e.g. <3% from specified nominal power.
² The long term power test is carried out at constant laser body temperature (+/-0.1 ‎°C) using an optical power meter with an input bandwidth of 10 Hz. The actual measurement rate has a period of about 20 seconds to 1 minute.
³ The long term power test is carried out at constant laser body temperature (+/-0.1 ‎°C) using an optical power meter with an input bandwidth of 10 Hz. The actual measurement rate has a period of about 20 seconds to 1 minute.
⁴ Noise level is measured with a fast photodiode connected to an oscilloscope. The overall system bandwidth is from 2 kHz to 20 MHz.
⁵ Break-out-boxes AM-C8 and AM-C3 can be used for conversion of UART communication to either USB or RS232.
⁶ Excluding control interface pins and an output window/fiber assembly.
⁷ Whichever occurs first. The laser has an integrated operational hours counter.

Note: Product specifications are subject to change without prior notice to improve reliability, function or design or otherwise.

Typical spectrum

Spectrum of 450 nm Laser (Diode; SMA port) — Typical spectrum of 0450 nm diode laser. Measured with 10 pm resolution.

Typical Near Field

Typical Far Field

Drawing