505 nm Laser

Item Code: 0505L-16A-NI-NT-NF
Diode SMA port
Preliminary
Product specifications are subject to change, delivery time is less predictable.
Full production
Product specifications are stable. Delivery time is predictable.
Replacement in due course
The product is to be replaced. Please contact us regarding forseeable changes
Not for new designs
The product is to be discontinued. Please contact us for production plans.
Orders still accepted, deliveries still possible
The product will be discontinued soon but we still have some stock of finished items or neccessary components.
No more orders accepted
Some products might be reserved for in-warranty replacement and outstanding orders.
Discontinued
The product is no longer available. Please contact us regarding alternatives or custom solutions.
Available (in stock) Not in stock

Description

Green 505 nm laser with an SMA output is a very compact high-performance laser source for multimode fiber installations. Multimode fiber can be supplied upon request.

Last edited on: 28 November 2023
Parameter Minimum Value Typical Value Maximum Value
 Central wavelength, nm 500 505 510
 Longitudinal modes - Multiple -
 Spectral line width FWHM, nm 0.02 0.7 2
 Output power, mW 1 - 50 -
 Fiber coupling efficiency, % 2 50 70 80
 Fiber core diameter, μm 50 105 200
 Power stability, % (RMS, 8 hrs) 3 0.01 0.05 0.4
 Power stability, % (peak-to-peak, 8 hrs) 4 0.1 0.4 2
 Intensity noise, % (RMS, 20 Hz to 20 MHz) 5 0.1 0.5 1
 Transversal modes - Multiple -
 Control interface type 6 - UART -
 Operation mode - APC (CW) -
 Modulation bandwidth, MHz 7 - 10 -
 Input voltage, VDC 4.8 5 5.3
 External power supply requirement - +5 V DC, 1.5 A -
 Dimensions (WxDxH), mm 8 - 50 x 30 x 18 -
 Heat-sinking requirement, °C/W - 1 -
 Optimum heatsink temperature, °C 15 20 30
 Warm up time, mins (cold start) 0.1 0.5 1
 Temperature stabilization - Internal TEC -
 Overheat protection - Yes -
 Storage temperature, °C (non-condensing) -10 - 50
 Max. power consumption, W 0.4 0.2 10
 Net weight, kg 0.1 0.12 0.14
 Warranty, months (op. hrs) 9 - 14 (10000) -
 RoHS - Yes -
 CE compliance - - General Product Safety Directive (GPSD) 2001/95/EC
- (EMC) Directive 2004/108/EC
-
 Laser safety class - 3B -
 OEM lasers are not compliant with - IEC60825-1:2014 (compliant using additional accessories) -
 Country of origin - Lithuania -

1 The optical power can be tuned from virtually 0% to 100%. However, other specifications, such as central wavelength, power stability, noise, polarization ratio, beam shape, quality and circularity are not guaranteed at power levels other than factory preset power. Significantly worse power stability is to be expected at very low power levels, e.g. <3% from specified nominal power.

2 Output power is heavily dependent on fiber insertion repeatability.

3 The long term power test is carried out at constant laser body temperature (+/-0.1 ‎°C) using an optical power meter with an input bandwidth of 10 Hz. The actual measurement rate has a period of about 20 seconds to 1 minute.

4 The long term power test is carried out at constant laser body temperature (+/-0.1 ‎°C) using an optical power meter with an input bandwidth of 10 Hz. The actual measurement rate has a period of about 20 seconds to 1 minute.

5 Noise level is measured with a fast photodiode connected to an oscilloscope. The overall system bandwidth is from 2 kHz to 20 MHz.

6 Break-out-boxes AM-C8 and AM-C3 can be used for conversion of UART communication to either USB or RS232.

7 TTL digital modulation up to 10 MHz.

8 Excluding control interface pins and an output window/fiber assembly.

9 Whichever occurs first. The laser has an integrated operational hours counter.

Typical spectrum

Typical spectrum of 0505 nm diode laser. Measured with 20 pm resolution.

Spectrum of 505 nm Laser
Drawing

The key dimensions of a MatchBox with SMA port.

Drawing of 505 nm Laser
This website uses cookies. Learn more
Agree with all cookies