830 nm Laser (Diode; MM Fiber)

Select Fiber Termination:

Item Code:
0830L-14A-NI-PT-NF
Product status:
Full production Product specifications are stable. Delivery time is predictable.
Availability:

Description

830 nm infrared laser of the MatchBox series coupled with multi-mode (MM) fiber. These lasers are used as compact and cost-effective laser sources for metrology and spectroscopy applications. High long-term power stability is ensured by TEC thermal stabilization, as well as thermal and optical feedback.

By default, this type of laser is built with FC/PC connector, but other fiber terminations are available upon request. Details about non-standard connector and the fiber used with it should be discussed with the Integrated Optics sales team.

Fiber Termination - FC/PC (PT): FC/PC has good insertion repeatability, therefore is often used in single-mode fiber applications. Features a key for polarization-maintaining fiber installations.
Links and Downloads
About Matchbox
Datasheet
Brochure
User Manual
Drawings
Control Software (Windows)
Accessories
Diode Laser Essential Accessory Bundle
AM-BUNDLE1
SLM Laser Essential Accessory Bundle
AM-BUNDLE2
USB Break-out-Box for Single-Wavelength MatchBoxⓇ
AM-C8
RS232 Break-out-Box for Single-Wavelength MatchBox®
AM-C3
18W USB type C power supply
AM-P7
60W USB type C power supply
AM-P8
Compact Fan Cooler For MatchBox®
AM-H8
Fan Cooler for MatchBox®
AM-H3
Stand-alone Air Cooled Heatsink With TEC
AM-H10
MatchBoxⓇ Adapter For 25mm Post
AM-H12
Safety key box
AM-C7
Replacement Adapter For Coherent OBIS Type of Lasers
AM-H5
Replacement Adapter for Coherent CUBE Type of Lasers
AM-H6
M6 Optical Breadboard Adapter for MatchBox®
AM-H7
Laser Safety Goggles for 200-400 nm, 765-1080 nm
DD2#55
Specifications
Last edited on:  25 April 2022
Parameter Minimum Value Typical Value Maximum Value
 Central Wavelength, nm 820 830 840
 Longitudinal modes - Multiple -
 Spectral line width FWHM, nm 0.02 0.5 1
 Output power, mW - 90 1 -
 Power stability, % (RMS, 8 hrs) 0.01 0.05 2 0.5
 Power stability, % (peak-to-peak, 8 hrs) 0.1 0.5 3 1
 Intensity noise, % (RMS, 20 Hz to 20 MHz) 0.05 0.25 4 0.6
 Transversal modes - Multiple -
 Control interface type - UART 5 -
 Operation mode - APC (CW) -
 Modulation bandwidth, MHz - 10 6 -
 Input voltage, VDC 4.8 5 5.3
 External power supply requirement - +5 V DC, 1.5 A -
 Dimensions, mm - 50 x 30 x 18 7 -
 Fiber Length, m 0.95 1 1.1
 Heat-sinking requirement, °C/W - 1 -
 Optimum heatsink temperature, °C 15 20 30
 Warm up time, mins (cold start) 0.1 0.5 1
 Temperature stabilization - Internal TEC -
 External fan control - No 8 -
 Overheat protection - Yes -
 Storage temperature, °C (non-condensing) -10 - 50
 Net weight, kg 0.1 0.12 0.14
 Max. power consumption, W 0.4 2 10
 Warranty, months (op. hrs) - 14 (10000) 9 -
 RoHS - Yes -
 CE compliance - - General Product Safety Directive (GPSD) 2001/95/EC
- (EMC) Directive 2004/108/EC 		-
 Laser Safety Class - 3B -
 OEM lasers are not compliant with - IEC60825-1:2014 (compliant using additional accessories) -
 Country of origin - Lithuania -
1 The optical power can be tuned from virtually 0% to 100%. However, other specifications, such as central wavelength, power stability, noise, polarization ratio, beam shape, quality and circularity are not guaranteed at power levels other than factory preset power. Significantly worse power stability is to be expected at very low power levels, e.g. <3% from specified nominal power.
2 The long term power test is carried out at constant laser body temperature (+/-0.1 ‎°C) using an optical power meter with an input bandwidth of 10 Hz. The actual measurement rate has a period of about 20 seconds to 1 minute.
3 The long term power test is carried out at constant laser body temperature (+/-0.1 ‎°C) using an optical power meter with an input bandwidth of 10 Hz. The actual measurement rate has a period of about 20 seconds to 1 minute.
4 Noise level is measured with a fast photodiode connected to an oscilloscope. The overall system bandwidth is from 2 kHz to 20 MHz.
5 Break-out-boxes AM-C8 and AM-C3 can be used for conversion of UART communication to either USB or RS232.
6 TTL digital modulation up to 10 MHz.
7 Excluding control interface pins and an output window/fiber assembly.
8 This function can be enabled in hardware only if the fast modulation option is disabled. The customer must specify this before ordering the laser.
9 Whichever occurs first. The laser has an integrated operational hours counter.
Note: Product specifications are subject to change without prior notice to improve reliability, function or design or otherwise.
Typical spectrum
Spectrum of 830 nm Laser (Diode; MM Fiber)
Typical spectrum of 0830 nm diode laser. Measured with 20 pm resolution.
Typical Near Field
Near field beam profile of 830 nm Laser (Diode; MM Fiber)
Drawing
Drawing of 830 nm Laser (Diode; MM Fiber)
The key dimensions of a fiber-coupled MatchBox.