1029 NM PICOSECOND Q-SWITCH LASER (FLASH SERIES)

Item Code:
1030U-11C
Product status:
Preliminary Product specifications are subject to change, delivery time is less predictable.
Availability:

Description
An ultra-compact 1029 nm picosecond laser is a high peak power passive Q-Switch transmitter for OEM LiDAR applications. Short pulse duration of  less than 300 ps allows high spatial resolution, high peak power of >300 kW allows large distances to be measured.
Apart from LiDAR, this laser is also usable in portable or even wearable Laser induced breakdown spectrosccopy (LIBS) analyzers, portable and even wearable LiDAR systems and material processing.

Links and Downloads
Datasheet
Specifications
Last edited on:  29 January 2019
Parameter Minimum Value Typical Value Maximum Value
 Central Wavelength, nm 1028 1030 1032
 Longitudinal modes - multiple -
 Spectral line width FWHM, nm - 0.7 1
 Average output power, mW - 20
Heat dissipation limited
 Pulse duration, ps 250 500 900
 Repetition rate, Hz (pulse-on-demand mode) single-shot 20 1 100
 Repetition rate, kHz (burst mode) 1 2 2 10
 Pulse energy, µJ 100 150 3 250
 Pulse-to-pulse stability, % - 5 10
 Transversal modes - TEM00 -
 Beam Diameter at Aperture (1/e2), mm - 0.2 -
 Beam divergence (full angle), mrad - 5 4 10
 M2 effective - 2 5 4
 Polarization direction - Horizontal / unpolarized -
 Polarization contrast (in polarized version) - 100:1 500:1
 Control interface type - SlimStack Hybrid Power Receptacle (Molex 104249-0810) -
 Operation mode - APC, pulse detection
-
 Input voltage, VDC - 1.65 2
 External laser diode driver requirement - +2 V DC, 12A 6 -
 Dimensions (L-W-H), mm - 31.3 x 12 x 5.8 7 -
 Beam height from the base, mm - 3 -
 Heat-sinking requirement, °C/W not needed (for low duty cycle single shot opperation)
-
1 (needed for higher rep. rate operation)
 Operating temperature, °C 20 30
40
 Warm up time - Instantly operational at operating temperature
-
 Temperature stabilization - No -
 Overheat protection - No 8 -
 Reverse voltage protection - No -
 Storage temperature, °C (non-condensing) -20 - 70
 Net weight, kg - 0.008 -
 Electrical energy consumption, mJ - 48 9 -
 Warranty, months - 14 (Limited)
10
-
 RoHS - Yes -
 CE compliance - - General Product Safety Directive (GPSD) 2001/95/EC
- (EMC) Directive 2004/108/EC
-
 Laser Safety Class - 3B -
 OEM lasers are not compliant with - IEC60825-1:2014 (compliant using additional accessories) -
1 There are two operational modes: pulse-on-demand mode (1) and free-running bust mode (2). Repetition rates of 100 Hz are applicable for pulse-on-demand, higher frequencies are applicable for the free-running mode.
2 Pulse repetition rate is current-dependent. Burst duration is heat dissipation limited. Typical burst duration is about 1 second, but can be extended by using a good heat sinking solution.
3 Peak power limitations apply. Max. peak power currently is 300 kW in for unpolarized radiation and 100 kW for polarized radiation. We put constant R&D efforts to increase this further.
4 The laser is not collimated internally.
5 Optical design is optimized for highest peak power.
6 A demo electronics board is provided with the first order of 5 pcs.
7 Only laser head.
8 Overheat protection can be implemented by an itegrator, by using an internal NTC (10K) thermistor.
9 e.g. 1W @20Hz pulse repetition rate in single-pulse triggering mode.
10 Warranty is not applicable to faults of the pump laser diode - a component which is sensitive to electronics circuitry design and operational regimes. Please consult with Integrated Optics regarding most appropriate driving circuit design, duty cycles, etc.
Note: Product specifications are subject to change without prior notice to improve reliability, function or design or otherwise.
Drawing

Drawing of 1029 NM PICOSECOND Q-SWITCH LASER (FLASH SERIES)
None