Diode Laser Combiner; Free-space (405 nm, 520 nm, 660 nm)

Item Code:
40A-XXY-52A-66A-11-DM-NT
Product status:
Preliminary Product specifications are subject to change, delivery time is less predictable.
Availability:

Description

A widely configurable 3-wavelength dichroic combiner featuring precisely co-aligned optical paths in a free-space output configuration. All optics and electronics fitted into the ultra compact 'Matchbox' housing. This particular configuration provides up to three wavelengths, which are standard for use in Life Sciences, Food, Metrology and Medical applications. An easy to use PC interface and separate TTL inputs allows full control over the individual wavelengths.


        Features:
  • Three wavelengths
  • Plug-and-play
  • Single user interface for all 3 lasers
Advantages:
  • Space saving design
  • No optics realignment
  • Remote PC control
Applications:
  • Wide field and Fluorescence Microscopy
  • Flow cytometry
  • Food sorting and quality
  • Particle characterization


Modulation - Direct TTL (DM): Emitter is modulated directly with TTL signal.
Links and Downloads
About Wavelength Combiner
Datasheet
Brochure
User Manual
Drawings
Control Software
Accessories
Laser Combiner Accessory Bundle
AM-BUNDLE4
USB Break-out-Box for Multi-Wavelength MatchBoxⓇ
AM-C9
18W USB type C PD power supply
AM-P7
60W USB power supply, PD
AM-P8
Compact Fan Cooler For MatchBox®
AM-H8
Fan Cooler for MatchBox®
AM-H3
Compact TEC-Cooled Mounting Plate For MatchBox
AM-H11
MatchBoxⓇ Adapter For 25mm Post
AM-H12
MatchBox Laser Shutter for 16 mm Cage System
AM-B5
XZ Axis Adjustable Shutter With Internal SM05 Thread
AM-B7
Replacement Adapter For Coherent OBIS Type of Lasers
AM-H5
Replacement Adapter for Coherent CUBE Type of Lasers
AM-H6
M6 Optical Breadboard Adapter for MatchBox®
AM-H7
Safety key box
AM-C7
Laser Safety Goggles for 850-10600 nm
FG1#55
Specifications
Last edited on:  20 July 2020
Parameter Minimum Value Typical Value Maximum Value
 Output power, mW - 405 nm - 120
520 nm - 80
660 nm - 100 1 		-
 Wavelength Tolerance, nm - +/-3
 -
 Longitudinal Modes - Multiple -
 Spectral line width FWHM, nm - 1 2
 Power stability, % (RMS, 8 hrs) at 20°C - 0.2 2 1
 Noise, % (RMS, 20 Hz to 20 MHz) - 0.5 3 1
 Transversal Mode - TEM00 -
 Polarization direction - Horizontal -
 Polarization contrast 405 nm - 50
520 nm - 50
660 nm - 10		 405 nm - 300
520 nm - 300
660 nm - 100 		-
 Control Interface - UART 4 -
 Operation Mode - ACC (CW) -
 Input voltage, VDC 8 9 12
 External Power Supply Requirement, V - +9 V DC, 1.5 A 5 +12 V DC, 1.5 A
 Dimensions, mm - 50 x 30 x 18 6 -
 Beam height from the base, mm - 10.4 -
 Heat-sinking requirement, °C/W - <0.5
 -
 Optimum heatsink temperature, °C - 20 25
 Warm-up Time (Cold Start) - < 1 2
 Temperature Stabilization - Internal TEC -
 Overheat Protection - Yes -
 Storage temperature, °C (non-condensing) - - -
 Net weight, kg - 0.3
 -
 Power consumption, W - 2 7 18
 Warranty, months (op. hrs) - 14 (10000) 8 -
 RoHS - Yes -
 CE Compliance - - General Product Safety Directive (GPSD) 2001/95/EC - (EMC) Directive 2004/108/EC -
 OEM Lasers Are Not Compliant With - IEC60825-1:2014 -
1 The optical power can be tuned from virtually 0% to 100% by changing the driving current of the laser diodes. However, other specifications, such as central wavelength, power stability, noise, polarization ratio, beam shape, quality, and circularity are not guaranteed at power levels other than factory preset power. Significantly worse power stability is to be expected at very low power levels, e.g. <3% from specified nominal power.
2 The long term power test is carried out at constant laser body temperature (+/-0.1 ‎°C) using an optical power meter with an input bandwidth of 10 Hz. The actual measurement rate has a period of about 20 seconds to 1 minute.
3 Noise level is measured with a fast photodiode connected to an oscilloscope. The overall system bandwidth is from 2 kHz to 20 MHz.
4 The break-out-box AM-C9 can be used for conversion of UART communication to USB.
5 If the break-out-box AM-C9 is used, a PD (Power Delivery) type of power supply can be used.
6 Excluding control interface pins and an output window/fiber assembly.
7 For single enabled wavelength.
8 Whichever occurs first.
Note: Product specifications are subject to change without prior notice to improve reliability, function or design or otherwise.
Drawing
Drawing of Diode Laser Combiner; Free-space (405 nm, 520 nm, 660 nm)
None