450 nm Laser

Item Code: 0450L-13A-NI-PT-NF
Diode SM fiber
Fiber Termination
Preliminary
Product specifications are subject to change, delivery time is less predictable.
Full production
Product specifications are stable. Delivery time is predictable.
Replacement in due course
The product is to be replaced. Please contact us regarding forseeable changes
Not for new designs
The product is to be discontinued. Please contact us for production plans.
Orders still accepted, deliveries still possible
The product will be discontinued soon but we still have some stock of finished items or neccessary components.
No more orders accepted
Some products might be reserved for in-warranty replacement and outstanding orders.
Discontinued
The product is no longer available. Please contact us regarding alternatives or custom solutions.
Available (in stock) Not in stock

Description

450 nm laser diode module is an excellent choice for flow cytometry, fluorescence, and biomedical applications. Small footprint, stable power, low power consumption are only a few advantages of this laser. Single-mode fiber provides practically ideal beam quality and focusability, thus making this laser an ideal solution for high-resolution fluorescence imaging and other applications.

By default, this type of laser is built with FC/PC connector, but other fiber terminations are available upon request. Details about the non-standard connector and the fiber used with it should be discussed with the Integrated Optics sales team.

Fiber Termination - FC/PC (PT): FC/PC has good insertion repeatability, therefore is often used in single-mode fiber applications. Features a key for polarization-maintaining fiber installations.

Last edited on: 27 December 2022
Parameter Minimum Value Typical Value Maximum Value
 Central wavelength, nm 442 450 458
 Longitudinal modes - Multiple -
 Spectral line width FWHM, nm - 0.8 1
 Output power, mW 1 - 35 -
 Power stability, % (RMS, 8 hrs) 2 0.02 0.05 0.5
 Power stability, % (peak-to-peak, 8 hrs) 3 0.1 0.5 1
 Intensity noise, % (RMS, 20 Hz to 20 MHz) 4 0.05 0.25 0.6
 Transversal modes - TEM00 -
 M² effective - 1.05 1.1
 Fiber - S405-XP -
 Fiber length, m 0.95 1 1.1
 Control interface type 5 - UART -
 Operation mode 6 - APC (CW) -
 Modulation bandwidth, MHz 7 - 10 -
 Input voltage, VDC - 5 -
 Input current, A - 1.5 -
 Max. power consumption, W - 2 -
 Optimum heatsink temperature, °C 15 20 30
 Warm up time, mins (cold start) - 1 2
 Heat-sinking requirement, °C/W - 1 -
 Temperature stabilization - Internal TEC -
 External fan control 8 - TBD -
 Overheat protection - Yes -
 Storage temperature, °C (non-condensing) -10 - 50
 Dimensions (WxDxH), mm 9 - 50 x 30 x 18 -
 Net weight, kg - 0.2 -
 Laser safety class - 3B -
 RoHS - Yes -
 CE compliance - - General Product Safety Directive (GPSD) 2001/95/EC
- (EMC) Directive 2004/108/EC
-
 OEM lasers are not compliant with - IEC60825-1:2014 (compliant using additional accessories) -
 Warranty, months (op. hrs) 10 - 14 (10000) -
 Country of origin - Lithuania -

1 The optical power can be tuned from virtually 0% to 100%. However, other specifications, such as central wavelength, power stability, noise, polarization ratio, beam shape, quality and circularity are not guaranteed at power levels other than factory preset power. Significantly worse power stability is to be expected at very low power levels, e.g. <3% from specified nominal power.

2 The long term power test is carried out at constant laser body temperature (+/-0.1 ‎°C) using an optical power meter with an input bandwidth of 10 Hz. The actual measurement rate has a period of about 20 seconds to 1 minute.

3 The long term power test is carried out at constant laser body temperature (+/-0.1 ‎°C) using an optical power meter with an input bandwidth of 10 Hz. The actual measurement rate has a period of about 20 seconds to 1 minute.

4 Noise level is measured with a fast photodiode connected to an oscilloscope. The overall system bandwidth is from 2 kHz to 20 MHz.

5 Break-out-boxes AM-C8 and AM-C3 can be used for conversion of UART communication to either USB or RS232.

6 APC - Automatic Power Control.

7 TTL digital modulation up to 10 MHz in automatic current control (ACC) mode. TTL modulation speed in automatic power control (APC) is up to 1 kHz.

8 This function can be enabled in hardware only if the fast TTL modulation option is disabled. The customer must specify whether the fan control or TTL modulation is required before ordering the laser.

9 Excluding control interface pins and an output window/fiber assembly.

10 Whichever occurs first. The laser has an integrated operational hours counter.

Drawing

The key dimensions of a fiber-coupled MatchBox.

Drawing of 450 nm Laser
Typical Near Field

Near field beam profile of 450 nm Laser
This website uses cookies. Learn more
Agree with all cookies