Multi-Wavelength Laser; MM Fiber (405 nm, 488 nm, 638 nm)

Select Fiber Termination:

Item Code:
40A-48A-XXY-64A-14-DM-PT
Product status:
Preliminary Product specifications are subject to change, delivery time is less predictable.
Availability:

Description

A multi-wavelength laser featuring 3 laser diodes integrated within an ultra-compact MM (multi-mode) fiber-coupled 'Matchbox' housing. A classical dichroic mirror combining technique is used in combination with our proprietary micro-optics assembly to make this system both economical and compact. All optics and electronics are fitted into 'Matchbox' housing. This particular configuration combines wavelengths, which are standard for use in Life Sciences, Food sorting, Metrology, and Medical applications. An easy-to-use PC interface and separate TTL inputs allow full control over the individual wavelengths.

Features:
  • Three wavelengths
  • Plug-and-play
  • Single user interface for all 3 wavelengths
Advantages:
  • Space-saving design
  • No optics realignment
  • Remote PC control




Modulation - Direct TTL (DM): Emitter is modulated directly with TTL signal.
Fiber Termination - FC/PC (PT): FC/PC has good insertion repeatability, therefore is often used in single-mode fiber applications. Features a key for polarization-maintaining fiber installations.
Links and Downloads
About Wavelength Combiner
Datasheet
Brochure
User Manual
Drawings
Control Software
Accessories
Laser Combiner Accessory Bundle
AM-BUNDLE4
USB Break-out-Box for Multi-Wavelength MatchBoxⓇ
AM-C9
18W USB type C power supply
AM-P7
60W USB type C power supply
AM-P8
Compact Fan Cooler For MatchBox®
AM-H8
Fan Cooler for MatchBox®
AM-H3
Compact TEC-Cooled Mounting Plate For MatchBox
AM-H11
MatchBoxⓇ Adapter For 25mm Post
AM-H12
Safety key box
AM-C7
Laser Safety Goggles for 850-10600 nm
FG1#55
Applications
Flow Cytometry
Widefield Microscopy
Fluorescence Microscopy
Food sorting
Particle characterization
Specifications
Last edited on:  6 November 2023
Parameter Minimum Value Typical Value Maximum Value
 Output power, mW - 405 nm - 100
488 nm - 40
638 nm - 100 1 		-
 Wavelength tolerance, nm - +/-4
 -
 Fiber core diameter, μm 50 105 2 200
 Power stability, % (RMS, 8 hrs) - 0.2 3 1
 Longitudinal modes - Multiple -
 Spectral line width FWHM, nm - <1.5 -
 Intensity noise, % (RMS, 20 Hz to 20 MHz) - <1 4 -
 Transversal modes - multimode (top-hat-like)
 -
 Control interface type - UART
5 		-
 Operation mode - ACC (CW) -
 Input voltage, VDC 8 9
 12
 External power supply requirement - +9 V DC, 1.5 A 6 +12 V DC, 1.5 A
 Dimensions (WxDxH), mm - 50 x 30 x 18 7 -
 Heat-sinking requirement, °C/W - <0.5
 -
 Optimum heatsink temperature, °C 15 20 30
 Warm up time, mins (cold start) 0.1 0.5 1
 Temperature stabilization - Internal TEC -
 Overheat protection - Yes -
 Storage temperature, °C (non-condensing) - - -
 Net weight, kg - 0.2
 -
 Power consumption, W - 2 8 18
 Warranty, months (op. hrs) - 14 (10000) 9 -
 RoHS - Yes -
 CE compliance - - General Product Safety Directive (GPSD) 2001/95/EC - (EMC) Directive 2004/108/EC -
 OEM lasers are not compliant with - IEC60825-1:2014 (compliant using additional accessories) -
 Modulation bandwidth, MHz - 10 10 -
1 The optical power can be tuned from virtually 0% to 100% by changing the driving current of the laser diodes. However, other specifications, such as central wavelength, power stability, noise, polarization ratio, beam shape, quality, and circularity are not guaranteed at power levels other than factory preset power. Significantly worse power stability is to be expected at very low power levels, e.g. <3% from specified nominal power.
2 Customer's choice.
3 The long term power test is carried out at constant laser body temperature (+/-0.1 ‎°C) using an optical power meter with an input bandwidth of 10 Hz. The actual measurement rate has a period of about 20 seconds to 1 minute.
4 Noise level is measured with a fast photodiode connected to an oscilloscope. The overall system bandwidth is from 2 kHz to 20 MHz.
5 The break-out-box AM-C9 can be used for conversion of UART communication to USB.
6 If the break-out-box AM-C9 is used, a PD (Power Delivery) type of power supply can be used.
7 Excluding control interface pins and an output window/fiber assembly.
8 For single enabled wavelength.
9 Whichever occurs first.
10 TTL digital modulation up to 10 MHz.
Note: Product specifications are subject to change without prior notice to improve reliability, function or design or otherwise.
Drawing
Drawing of Multi-Wavelength Laser; MM Fiber (405 nm, 488 nm, 638 nm)
None