Diode Laser Combiner; SM Fiber (488 nm, 520 nm, 660 nm)

Item Code:
XXY-48A-52A-66A-13-DM-PT
Product status:
Preliminary Product specifications are subject to change, delivery time is less predictable.
Availability:

Description
It is a wavelength combiner featuring 3 laser diodes integrated within ultra compact 'Matchbox®' housing. Classical dichroic mirror combining technique is used in combination with our proprietary micro-optics assembly to make this system both economical and compact. All optics and electronics are fitted into the ultra-compact 'Matchbox' housing. An easy to use PC interface and separate TTL inputs allow full control over the individual wavelengths.
This wavelength combiner provides up to three wavelengths, which are standard for use in Life Sciences, Food sorting, Metrology, and Medical applications. The unit combines wavelengths into an SM output fiber. An easy to use PC interface allows full control over the individual wavelengths.

Features:
  • Three wavelengths
  • Plug-and-play
  • A single user interface for all 3 lasers
Advantages:
  • Space saving design
  • No optics realignment
  • Remote PC control
Applications:
  • Confocal Fluorescence Microscopy
  • Flow cytometry
  • Food sorting and quality
  • Particle characterization
Modulation - Direct TTL (DM): Emitter is modulated directly with TTL signal.
Fiber Termination - FC/PC (PT): FC/PC has good insertion repeatability, therefore is often used in single-mode fiber applications. Features a key for polarization-maintaining fiber installations.
Links and Downloads
About Wavelength Combiner
Datasheet
Brochure
User Manual
Drawings
Control Software
Accessories
Laser Combiner Accessory Bundle
AM-BUNDLE4
USB Break-out-Box for Multi-Wavelength MatchBoxⓇ
AM-C9
18W USB type C PD power supply
AM-P7
60W USB power supply, PD
AM-P8
Compact Fan Cooler For MatchBox®
AM-H8
Fan Cooler for MatchBox®
AM-H3
Compact TEC-Cooled Mounting Plate For MatchBox
AM-H11
MatchBoxⓇ Adapter For 25mm Post
AM-H12
Replacement Adapter For Coherent OBIS Type of Lasers
AM-H5
Replacement Adapter for Coherent CUBE Type of Lasers
AM-H6
M6 Optical Breadboard Adapter for MatchBox®
AM-H7
Safety key box
AM-C7
Laser Safety Goggles for 200-400 nm, 765-1080 nm
DD2#55
Applications
Flow Cytometry
Laser Diffraction Particle Analysis
Confocal Microscopy
Specifications
Last edited on:  20 July 2020
Parameter Minimum Value Typical Value Maximum Value
 Output power, mW - 488 nm - 20
520 nm - 40 
660 nm - 40 1 		-
 Wavelength Tolerance, nm - +/-5
 -
 Longitudinal Modes - Multiple -
 Spectral line width FWHM, nm - 0.7 1.2
 Fiber Core Diameter - 3.5 µm -
 Power stability, % (RMS, 8 hrs) - 0.2 2 1
 Power stability, % (peak-to-peak, 8 hrs) - 0.2 3 1
 Noise, % (RMS, 20 Hz to 20 MHz) - 0.8 4 2
 Transversal Mode - Single -
 Control Interface - UART 5 -
 Operation Mode - ACC (CW) -
  Modulation bandwidth, MHz - 10 6 -
 Input voltage, VDC 8 9 12
 External Power Supply Requirement - 9 (@1.5 Amp) 7 12 (@1.5 Amp)
 Dimensions, mm - 50 x 30 x 18 8 -
 Heat-sinking requirement, °C/W - <0.5 -
 Optimum heatsink temperature, °C 15 20 30
 Warm-up Time, min (Cold Start) 0.1 0.5 1
 Temperature Stabilization - Internal TEC -
 Overheat Protection - Yes -
 Storage temperature, °C (non-condensing) -10 - 50
 Net weight, kg - 0.2
 -
 Power consumption, W - 2 9 18
 Warranty, months (op. hrs) - 14 (10000) 10 -
 RoHS - Yes -
 CE Compliance - - General Product Safety Directive (GPSD) 2001/95/EC - (EMC) Directive 2004/108/EC -
 OEM Lasers Are Not Compliant With - IEC60825-1:2014 (compliant using additional accessories) -
1 The optical power can be tuned from virtually 0% to 100%. However, other specifications, such as central wavelength, power stability, noise, polarization ratio, beam shape, quality and circularity are not guaranteed at power levels other than factory preset power. Significantly worse power stability is to be expected at very low power levels, e.g. <3% from specified nominal power.
2 The long term power test is carried out at constant laser body temperature (+/-0.1 ‎°C) using an optical power meter with an input bandwidth of 10 Hz. The actual measurement rate has a period of about 20 seconds to 1 minute.
3 The long term power test is carried out at constant laser body temperature (+/-0.1 ‎°C) using an optical power meter with an input bandwidth of 10 Hz. The actual measurement rate has a period of about 20 seconds to 1 minute.
4 Noise level is measured with a fast photodiode connected to an oscilloscope. The overall system bandwidth is from 2 kHz to 20 MHz.
5 The break-out-box AM-C9 can be used for conversion of UART communication to USB.
6 TTL digital modulation up to 10 MHz.
7 If the break-out-box AM-C9 is used, a PD (Power Delivery) type of power supply can be used.
8 Excluding control interface pins and an output window/fiber assembly.
9 For single enabled wavelength.
10 Whichever occurs first.
Note: Product specifications are subject to change without prior notice to improve reliability, function or design or otherwise.
Drawing
Drawing of Diode Laser Combiner; SM Fiber (488 nm, 520 nm, 660 nm)
None