Multi-Wavelength Laser

Item Code: 40A-52A-XXY-78A-11-NT-NF
Diode Free-space
Filter
Preliminary
Product specifications are subject to change, delivery time is less predictable.
Full production
Product specifications are stable. Delivery time is predictable.
Replacement in due course
The product is to be replaced. Please contact us regarding forseeable changes
Not for new designs
The product is to be discontinued. Please contact us for production plans.
Orders still accepted, deliveries still possible
The product will be discontinued soon but we still have some stock of finished items or neccessary components.
No more orders accepted
Some products might be reserved for in-warranty replacement and outstanding orders.
Discontinued
The product is no longer available. Please contact us regarding alternatives or custom solutions.
Available (in stock) Not in stock

Description

Uncover new possibilities in your research with our state-of-the-art 3-Wavelength Laser Combiner—a compact powerhouse designed to revolutionize life sciences and fluorescence applications. Seamlessly integrating four distinct wavelengths into a single housing, this device offers unparalleled convenience without compromising on performance.

Features:
  • Three wavelengths
  • Plug-and-play
  • Single user interface for all 3 wavelengths
Advantages:
  • Space-saving design
  • No optics realignment
  • Remote PC control




Last edited on: 29 May 2024
Parameter Minimum Value Typical Value Maximum Value
 Output power, mW 1 - 405 nm - 120
520 nm - 80
785 nm - 120
-
 Wavelength tolerance, nm 400
515
782
405
520
785
410
530
788
 Longitudinal modes - Multiple -
 Spectral line width FWHM, nm - 1 2
 Power stability, % (RMS, 8 hrs) 2 - 0.2 1
 Power stability, % (peak-to-peak, 8 hrs) - 1 3
 Intensity noise, % (RMS, 20 Hz to 20 MHz) 3 - 0.5 1
 Transversal modes - TEM00 -
 Polarization direction - Horizontal -
 Polarization contrast 50
10
10
405 nm - 300
520 nm - 50
785 nm - 50
-
 Beam width (1/e2), mm -
405 nm - 0.9
520 nm - 0.9
785 nm - 1
1.4
1.2
1.7
 Beam height (1/e2), mm -
405 nm - 1.3
520 nm - 1.4
785 nm - 1.2
1.7
1.7
1.9
 Beam position overlap, mm 4 - - 1
 Horizontal beam divergence, mrad -
405 nm - 0.9
520 nm - 1.3
785 nm - 1.5
1.5
1.6
1.8
 Vertical beam divergence, mrad -
405 nm - 0.5
520 nm - 0.4
785 nm - 0.8
1
0.8
1.6
 M² effective -
405 nm - 1.3
520 nm - 1.35
785 nm - 1.2
1.5
1.6
1.5
 Control interface type 5 - UART -
 Operation mode - ACC (CW) -
 Input voltage, VDC 8 9 12
 External power supply requirement 6 - +9 V DC, 1.5 A +12 V DC, 1.5 A
 Dimensions (WxDxH), mm 7 - 50 x 30 x 18 -
 Beam height from the base, mm - 10.4 -
 Heat-sinking requirement, °C/W - <0.5 -
 Optimum heatsink temperature, °C - 25 -
 Warm up time, mins (cold start) - < 1 2
 Temperature stabilization - Internal TEC -
 Overheat protection - Yes -
 Storage temperature, °C (non-condensing) - - -
 Net weight, kg - 0.3 -
 Power consumption, W 8 - 2 18
 Warranty, months (op. hrs) 9 - 14 (10000) -
 RoHS - Yes -
 CE compliance - - General Product Safety Directive (GPSD) 2001/95/EC - (EMC) Directive 2004/108/EC -
 OEM lasers are not compliant with - IEC60825-1:2014 (compliant using additional accessories) -
 Modulation bandwidth, MHz 10 - 10 -

1 The optical power can be tuned from virtually 0% to 100% by changing the driving current of the laser diodes. However, other specifications, such as central wavelength, power stability, noise, polarization ratio, beam shape, quality, and circularity are not guaranteed at power levels other than factory preset power. Significantly worse power stability is to be expected at very low power levels, e.g. <3% from specified nominal power.

2 The long term power test is carried out at constant laser body temperature (+/-0.1 ‎°C) using an optical power meter with an input bandwidth of 10 Hz. The actual measurement rate has a period of about 20 seconds to 1 minute.

3 Noise level is measured with a fast photodiode connected to an oscilloscope. The overall system bandwidth is from 2 kHz to 20 MHz.

4 Measured at 1 m from output aperture between the centers of two most distant beams.

5 Break-out-boxes AM-C8 and AM-C3 can be used for conversion of UART communication to either USB or RS232.

6 If the break-out-box AM-C9 is used, a PD (Power Delivery) type of power supply can be used.

7 Excluding control interface pins and an output window/fiber assembly.

8 For single enabled wavelength.

9 Whichever occurs first.

10 TTL digital modulation up to 10 MHz.

Drawing
Drawing of Multi-Wavelength Laser
Typical Near Field

Typical near field (0.45 m from output aperture) beam profile of 40A-52A-XXY-78A-11 combiner.

Near field beam profile of Multi-Wavelength Laser
Typical Far Field

Typical far field (1 m from output aperture) beam profile of 40A-52A-XXY-78A-11 combiner.

Far field beam profile of Multi-Wavelength Laser

Flow Cytometry

Flow cytometry is a sophisticated analytical technique widely used in biomedical research and clinical diagnostics. It allows for the simultaneous analysis of multiple physical and chemical characteristics of cells or particles as they flow through a laser beam. By utilizing fluorescence and light-scattering principles, flow cytometry provides valuable insights into cell populations, allowing researchers to study cell morphology, identify cell types, and assess various cellular functions with high-throughput precision.

This website uses cookies. Learn more
Agree with all cookies