Multi-Wavelength Laser; Free-space (450 nm, 520 nm, 638 nm)

Select Filter:

Item Code:
XXY-45A-52A-64A-11-DM-CF
Product status:
Full production Product specifications are stable. Delivery time is predictable.
Availability:

Description

A widely configurable 3-wavelength dichroic laser featuring precisely co-aligned optical paths in a free-space output configuration. All optics and electronics fitted into the ultra-compact 'Matchbox' housing. This particular configuration combines wavelengths, which are standard for use in Life Sciences, Food, Metrology, and Medical applications. An easy-to-use PC interface and separate TTL inputs allow full control over the individual wavelengths.

Features:
  • Three wavelengths
  • Plug-and-play
  • Single user interface for all 3 wavelengths
Advantages:
  • Space-saving design
  • No optics realignment
  • Remote PC control




Modulation - Direct TTL (DM): Emitter is modulated directly with TTL signal.
Filter - Clean-up filter (CF): It is used to increase side-mode suppression ratio (SMSR) in SLM laser and eliminate spontaneous emission of a laser diode.
Links and Downloads
About Wavelength Combiner
Datasheet
Brochure
User Manual
Drawings
Control Software
Accessories
Laser Combiner Accessory Bundle
AM-BUNDLE4
USB Break-out-Box for Multi-Wavelength MatchBoxⓇ
AM-C9
18W USB type C power supply
AM-P7
60W USB type C power supply
AM-P8
Compact Fan Cooler For MatchBox®
AM-H8
Fan Cooler for MatchBox®
AM-H3
Compact TEC-Cooled Mounting Plate For MatchBox
AM-H11
MatchBoxⓇ Adapter For 25mm Post
AM-H12
MatchBox Laser Shutter for 16 mm Cage System
AM-B5
XZ Axis Adjustable Shutter With Internal SM05 Thread
AM-B7
Safety key box
AM-C7
Laser Safety Goggles for 200-400 nm, 765-1080 nm
DD2#55
Applications
Flow Cytometry
Widefield Microscopy
Fluorescence Microscopy
Food sorting
Specifications
Last edited on:  28 May 2021
Parameter Minimum Value Typical Value Maximum Value
 Output power, mW - 450 nm - 70
520 nm - 80
638 nm - 130 1 		-
 Wavelength Tolerance, nm - +/-5
 -
 Longitudinal Modes - Multiple -
 Spectral line width FWHM, nm - 1 2
 Power stability, % (RMS, 8 hrs) at 20°C - 0.2 2 1
 Intensity noise, % (RMS, 20 Hz to 20 MHz) - 0.5 3 1
 Transversal Mode - TEM00 -
 Polarization direction - Horizontal -
 Polarization contrast 450 nm - 50
520 nm - 50
638 nm - 10		 450 nm - 300
520 nm - 300
638 nm - 100 		-
 Control Interface - UART 4 -
 Operation Mode - ACC (CW) -
 Input voltage, VDC 8 9 12
 External Power Supply Requirement, V - +9 V DC, 1.5 A 5 +12 V DC, 1.5 A
 Dimensions, mm - 50 x 30 x 18 6 -
 Beam height from the base, mm - 10.4 -
 Heat-sinking requirement, °C/W - <0.5
 -
 Optimum heatsink temperature, °C - 20 25
 Warm-up Time (Cold Start), min - < 1 2
 Temperature Stabilization - Internal TEC -
 Overheat Protection - Yes -
 Storage temperature, °C (non-condensing) - - -
 Net weight, kg - 0.15 -
 Power consumption, W - 2 7 18
 Warranty, months (op. hrs) - 14 (10000) 8 -
 RoHS - Yes -
 CE Compliance - - General Product Safety Directive (GPSD) 2001/95/EC - (EMC) Directive 2004/108/EC -
 OEM Lasers Are Not Compliant With - IEC60825-1:2014 (compliant using additional accessories) -
1 The optical power can be tuned from virtually 0% to 100% by changing the driving current of the laser diodes. However, other specifications, such as central wavelength, power stability, noise, polarization ratio, beam shape, quality, and circularity are not guaranteed at power levels other than factory preset power. Significantly worse power stability is to be expected at very low power levels, e.g. <3% from specified nominal power.
2 The long term power test is carried out at constant laser body temperature (+/-0.1 ‎°C) using an optical power meter with an input bandwidth of 10 Hz. The actual measurement rate has a period of about 20 seconds to 1 minute.
3 Noise level is measured with a fast photodiode connected to an oscilloscope. The overall system bandwidth is from 2 kHz to 20 MHz.
4 The break-out-box AM-C9 can be used for the conversion of UART communication to either USB.
5 If the break-out-box AM-C9 is used, a PD (Power Delivery) type of power supply can be used.
6 Excluding control interface pins and an output window/fiber assembly.
7 For single enabled wavelength.
8 Whichever occurs first.
Note: Product specifications are subject to change without prior notice to improve reliability, function or design or otherwise.
Typical Beam Waist Profile
Beam profile of Multi-Wavelength Laser; Free-space (450 nm, 520 nm, 638 nm) in the waist of f=200 mm lens
Typical beam profile of XXY-45A-52A-64A-11 combiner in the waist of f=200 mm lens.
Typical Near Field
Near field beam profile of Multi-Wavelength Laser; Free-space (450 nm, 520 nm, 638 nm)
Typical near field (0.45 m from output aperture) beam profile of XXY-45A-52A-64A-11 combiner.
Typical Far Field
Far field beam profile of Multi-Wavelength Laser; Free-space (450 nm, 520 nm, 638 nm)
Typical far field (1 m from output aperture) beam profile of XXY-45A-52A-64A-11 combiner.
Drawing
Drawing of Multi-Wavelength Laser; Free-space (450 nm, 520 nm, 638 nm)
Multi-Wavelength laser drawing.