Multi-Wavelength Laser; Free-space (520 nm, 785 nm)

Select Filter:

Item Code:
52A-78A-XXY-XXY-11-DM-NF
Product status:
Preliminary Product specifications are subject to change, delivery time is less predictable.
Availability:

Description

A widely configurable 2-wavelength dichroic laser featuring precisely co-aligned optical paths in a free-space output configuration. All optics and electronics fitted into the ultra-compact 'Matchbox' housing. This particular configuration combines wavelengths, which are standard for use in Life Sciences, Food, Metrology, and Medical applications. An easy-to-use PC interface and separate TTL inputs allow full control over the individual wavelengths.

Features:
  • Two wavelengths
  • Plug-and-play
  • Single user interface for both wavelengths
Advantages:
  • Space-saving design
  • No optics realignment
  • Remote PC control




Modulation - Direct TTL (DM): Emitter is modulated directly with TTL signal.
Specifications
Last edited on:  2 May 2023
Parameter Minimum Value Typical Value Maximum Value
 Output power, mW - 520 nm - 80
785 nm - 120
-
 Wavelength tolerance, nm - +/-3 nm
-
 Longitudinal modes - Multiple -
 Spectral line width FWHM, nm - 1 2
 Power stability, % (RMS, 8 hrs) at 20°C - 0.2 1
 Intensity noise, % (RMS, 20 Hz to 20 MHz) - 0.5 1 1
 Transversal modes - TEM00 -
 Polarization direction - Horizontal -
 Polarization contrast 520 nm - 10
785 nm - 10
520 nm - 50
785 nm - 50
-
 Control interface type - UART 2 -
 Operation mode - ACC (CW) -
 Input voltage, VDC 8 9 12
 External power supply requirement - +9 V DC, 1.5 A 3 +12 V DC, 1.5 A
 Dimensions (WxDxH), mm - 50 x 30 x 18 -
 Beam height from the base, mm - 10.4 -
 Heat-sinking requirement, °C/W - <0.5
-
 Optimum heatsink temperature, °C - 20 25
 Warm up time, mins (cold start) - < 1 2
 Temperature stabilization - Internal TEC -
 Overheat protection - Yes -
 Storage temperature, °C (non-condensing) - - -
 Net weight, kg - 0.3
-
 Max. power consumption, W - 2 4 18
 Warranty, months (op. hrs) - 14 (10000) 5 -
 RoHS - Yes -
 CE compliance - - General Product Safety Directive (GPSD) 2001/95/EC - (EMC) Directive 2004/108/EC -
 OEM lasers are not compliant with - IEC60825-1:2014 (compliant using additional accessories) -
1 Noise level is measured with a fast photodiode connected to an oscilloscope. The overall system bandwidth is from 2 kHz to 20 MHz.
2 The break-out-box AM-C9 can be used for conversion of UART communication to USB.
3 If the break-out-box AM-C9 is used, a PD (Power Delivery) type of power supply can be used.
4 For single enabled wavelength.
5 Whichever occurs first.
Note: Product specifications are subject to change without prior notice to improve reliability, function or design or otherwise.
Typical Beam Waist Profile

Beam profile of Multi-Wavelength Laser; Free-space (520 nm, 785 nm) in the waist of f=200 mm lens
Typical beam profile of 52A-78A-XXY-XXY-11 combiner in the waist of f=200 mm lens.
Typical Near Field

Near field beam profile of Multi-Wavelength Laser; Free-space (520 nm, 785 nm)
Typical near field (0.4 m from output aperture) beam profile of 52A-78A-XXY-XXY-11 combiner.
Typical Far Field

Far field beam profile of Multi-Wavelength Laser; Free-space (520 nm, 785 nm)
Typical far field (1 m from output aperture) beam profile of 52A-78A-XXY-XXY-11 combiner.
Drawing

Drawing of Multi-Wavelength Laser; Free-space (520 nm, 785 nm)
None