Rent a high-performance laser for a time-limited experiment. Or try several laser options before deciding, which to choose.
Your request has been sent successfully. We'll get back to you as soon as possible.
Back to homepageBegin your product purchase process, with flexibility for customization based on your needs.
Your request has been sent successfully. We'll get back to you as soon as possible.
Back to homepageParameter | Minimum Value | Typical Value | Maximum Value |
---|---|---|---|
 Output power, mW | - | 405 nm - 100 520 nm - 70 638 nm - 100 785 nm - 100 |
- |
 Wavelength tolerance, nm | 400 515 635 782 |
405 520 638 785 |
410 530 641 788 |
 Longitudinal modes | - | Multiple | - |
 Spectral line width FWHM, nm | - | 1 | 2 |
 Fiber core diameter, μm | - | 105 μm, 200 μm, 400 μm (+/- 2 %) | - |
 Power stability, % (RMS, 8 hrs) 1 | - | 0.2 | 1 |
 Intensity noise, % (RMS, 20 Hz to 20 MHz) 2 | - | 0.2 | 1 |
 Transversal modes | - | multimode (top-hat-like) | - |
 Control interface type 3 | - | UART | - |
 Operation mode | - | ACC (CW) | - |
 Modulation bandwidth, MHz 4 | - | 10 | - |
 Input voltage, VDC | - | 9 | 12 |
 External power supply requirement | - | +9 V DC, 1.5 A | +12 V DC, 1.5 A |
 Dimensions (WxDxH), mm | - | 50 x 30 x 18 | - |
 Heat-sinking requirement, °C/W | - | <0.5 | - |
 Optimum heatsink temperature, °C | - | 25 | - |
 Warm up time, mins (cold start) | - | < 1 min | - |
 Temperature stabilization | - | Internal TEC | - |
 Overheat protection | - | Yes | - |
 Storage temperature, °C (non-condensing) | - | - | - |
 Net weight, kg | - | 0.2 | - |
 Max. power consumption, W | - | 2 | - |
 Warranty, months (op. hrs) 5 | - | 14 (10000) | - |
 RoHS | - | Yes | - |
 CE compliance | - | - General Product Safety Directive (GPSD) 2001/95/EC - (EMC) Directive 2004/108/EC | - |
 OEM lasers are not compliant with | - | IEC60825-1:2014 (compliant using additional accessories) | - |
1 The long term power test is carried out at constant laser body temperature (+/-0.1 °C) using an optical power meter with an input bandwidth of 10 Hz. The actual measurement rate has a period of about 20 seconds to 1 minute.
2 Noise level is measured with a fast photodiode connected to an oscilloscope. The overall system bandwidth is from 2 kHz to 20 MHz.
3 The break-out-box AM-C9 can be used for conversion of UART communication to USB.
4 TTL digital modulation up to 10 MHz.
5 Whichever occurs first.
None
Laser Combiner Accessory Bundle
USB Break-out-Box for Multi-Wavelength MatchBoxⓇ
18W USB type C power supply
60W USB type C power supply
Compact Fan Cooler For MatchBox®
Fan Cooler for MatchBox®
Compact TEC-Cooled Mounting Plate For MatchBox
MatchBoxⓇ Adapter For 25mm Post
Safety key box
Laser Safety Goggles for 200-400 nm, 765-1080 nm